.. role:: cpp(code) :language: c++ .. _sec:amrvis: Amrvis ====== Our favorite visualization tool is Amrvis. We heartily encourage you to build the ``amrvis1d``, ``amrvis2d``, and ``amrvis3d`` executables, and use them to visualize your data. A useful feature is ``View/Dataset``, which allows you to view data in a nested spreadsheet that reflects the AMR hierarchy -- this can be handy for debugging. Other display options include: the ability to select the number of levels of data to show, whether to display grid boxes, and to specify the color palette. Below are instructions and tips for using Amrvis. Additional information is contained in the document ``Amrvis/Docs/Amrvis.tex`` (which can built into a ``pdf`` using ``pdflatex``). #. **Download and Build**: Amrvis is available for download from the ``AMReX-Codes/Amrvis`` GitHub repository. To download use, .. code-block:: console git clone https://github.com/AMReX-Codes/Amrvis To build, ``cd`` into ``Amrvis/``, and edit ``GNUmakefile`` by setting the variable ``COMP`` to your compiler suite. Type ``make DIM=1``, ``make DIM=2``, or ``make DIM=3`` to build. The result is an executable that looks like ``amrvis2d..ex``. | *3D Data Visualization with Volpack* If you want to build Amrvis with ``DIM=3`` for display of 3-dimensional data, you must first download and build ``volpack``. This can be done by cloning the repository or via package manager. To install by cloning the repository: .. code-block:: console git clone https://ccse.lbl.gov/pub/Downloads/volpack.git After downloading, ``cd`` into ``volpack/`` and type ``make``. To install via package manager, it is necessary to install the package, ``libvolpack1-dev``. This package is available for Debian Linux and can be installed with the command: .. code-block:: console sudo apt install libvolpack1-dev | .. note:: Amrvis requires the OSF/Motif libraries and headers. If you don't have these you will need to install the development version of motif through your package manager. ``lesstif`` gives some functionality and will allow you to build the Amrvis executable, but Amrvis may exhibit subtle anomalies. On most Linux distributions, the motif library is provided by the ``openmotif`` package, and its header files (like ``Xm.h``) are provided by ``openmotif-devel``. If those packages are not installed, then use the OS-specific package management tool to install them. | .. note:: These instructions assume that the install directories for Amrvis and volpack share the same parent directory. To install volpack in a different location specify the location of volpack in Amrvis's ``GNUmakefile`` by changing the variable ``VOLPACKDIR`` to the desired location. | After building you may want to create an alias for convenience. To do this type, .. code-block:: console alias amrvis2d /tmp/Amrvis/amrvis2d..ex | #. **Configure**: The settings for Amrvis are saved in the configuration file ``.amrvis.defaults`` in your home directory. A default version of this file is available in the parent directory of the Amrvis repo. Run the command ``cp Amrvis/amrvis.defaults ~/.amrvis.defaults`` to copy it to your home directory. A color palette is also available in the Amrvis directory as a file named ``Palette``. To configure Amrvis to use this palette you can open the ``.amrvis.defaults`` file in your home directory and edit the line containing ``palette`` to point to the location of this file. For example, :: palette ~/Amrvis/Palette Other lines in ``.amrvis.defaults`` control options such as the initial field to display, the number format, window size, etc. If there are multiple instances of the same option, the last option takes precedence. #. **Run**: By default, the plotfiles are directories that have the form pltXXXXX, where XXXXX is a number corresponding to the timestep that the file was created. Use ``amrvis2d `` or ``amrvis3d `` to see a single plotfile, or for 2D data sets, ``amrvis2d -a plt*``, which will animate the sequence of plotfiles. FArrayBoxes and MultiFabs can also be viewed with the ``-fab`` and ``-mf`` options. When opening MultiFabs, use the name of the MultiFab's header file ``amrvis2d -mf MyMultiFab_H``. You can use the "Variable" menu to change the variable. You can left-click drag a box around a region and click "View" :math:`\rightarrow` "Dataset" in order to look at the actual numerical values (see :numref:`Fig:Amrvis`). Or you can simply left click on a point to obtain the numerical value. You can also export the pictures in several different formats under ``File/Export``. In 2D you can right or center click to get line-out plots. In 3D you can right or center click to change the planes, and hold shift+(right or center) click to get line-out plots. | We have created a number of routines to convert AMReX plotfile data to other formats (such as Matlab), but in order to properly interpret the hierarchical AMR data, each tends to require its own idiosyncrasies. If you would like to display the data in another format, please leave a message on `AMReX's GitHub Discussions page`_. .. _`AMReX's GitHub Discussions page`: https://github.com/AMReX-Codes/amrex/discussions .. |a| image:: ./Visualization/Amrvis_2d.png :width: 100% .. |b| image:: ./Visualization/Amrvis_3d.png :width: 100% .. _Fig:Amrvis: .. table:: . 2D and 3D images generated using Amrvis. :align: center +-----+-----+ | |a| | |b| | +-----+-----+ Building Amrvis on macOS ------------------------ As previously outlined at the end of section :ref:`sec:build:make`, it is recommended to build using the `homebrew `_ package manager to install gcc. Furthermore, you will also need x11 and openmotif. These can be installed using homebrew also: #. ``brew cask install xquartz`` #. ``brew install openmotif`` Note that when the ``GNUmakefile`` detects a macOS install, it assumes that dependencies are installed in the locations that Homebrew uses. Namely the ``/usr/local/`` tree for regular dependencies and the ``/opt/`` tree for X11. .. _sec:visit: VisIt ===== AMReX data can also be visualized by VisIt, an open source visualization and analysis software. To follow along with this example, first build and run the first heat equation tutorial code (see the section on :ref:`sec:heat equation`). Next, download and install VisIt from https://wci.llnl.gov/simulation/computer-codes/visit. To open a single plotfile, run VisIt, then select "File" :math:`\rightarrow` "Open file ...", then select the Header file associated with the plotfile of interest (e.g., ``plt00000/Header``). Assuming you ran the simulation in 2D, here are instructions for making a simple plot: - To view the data, select "Add" :math:`\rightarrow` "Pseudocolor" :math:`\rightarrow` "phi", and then select "Draw". - To view the grid structure (not particularly interesting yet, but when we add AMR it will be), select "Add" :math:`\rightarrow` "Subset" :math:`\rightarrow` "levels". Then double-click the text "Subset - levels", enable the "Wireframe" option, select "Apply", select "Dismiss", and then select "Draw". - To save the image, select "File" :math:`\rightarrow` "Set save options", then customize the image format to your liking, then click "Save". Your image should look similar to the left side of :numref:`Fig:VisIt`. .. raw:: latex \begin{center} .. |c| image:: ./Visualization/VisIt_2D.png :width: 100% .. |d| image:: ./Visualization/VisIt_3D.png :width: 100% .. _Fig:VisIt: .. table:: : 2D (left) and 3D (right) images generated using VisIt. :align: center +-----+-----+ | |c| | |d| | +-----+-----+ .. raw:: latex \end{center} In 3D, you must apply the "Operators" :math:`\rightarrow` "Slicing" :math:`\rightarrow` "ThreeSlice", with the "ThreeSlice operator attribute" set to ``x=0.25``, ``y=0.25``, and ``z=0.25``. You can left-click and drag over the image to rotate the image to generate something similar to right side of :numref:`Fig:VisIt`. To make a movie, you must first create a text file named ``movie.visit`` with a list of the Header files for the individual frames. This can most easily be done using the command: .. highlight:: console :: ~/amrex-tutorials/ExampleCodes/Basic/HeatEquation_EX1_C> ls -1v plt*/Header | tee movie.visit plt00000/Header plt01000/Header plt02000/Header plt03000/Header plt04000/Header plt05000/Header plt06000/Header plt07000/Header plt08000/Header plt09000/Header plt10000/Header The next step is to run VisIt, select "File" :math:`\rightarrow` "Open file...", then select movie.visit. Create an image to your liking and press the "play" button on the VCR-like control panel to preview all the frames. To save the movie, choose "File" :math:`\rightarrow` "Save movie ...", and follow the on-screen instructions. .. warning:: The Visit reader determines the value of ``Cycle`` from the name of the plotfile (directory), specifically from the integer that follows the string "plt" in the plotfile name. So if you call it ``plt00100``, ``myplt00100`` or ``this_is_my_plt00100`` then it will correctly recognize and print ``Cycle: 100``. If you call it ``plt00100_old`` it will also correctly recognize and print ``Cycle: 100``. However, if you do not have ``plt`` followed immediately by the number, e.g. you name it ``pltx00100``, then VisIt will not be able to correctly recognize and print the value for ``Cycle``. (It will still read and display the data itself.) VisIt HDF5 Format ----------------- The plotfiles generated with the HDF5 format can be visualized by VisIt as well. To open a single plotfile, run VisIt, then select "File" :math:`\rightarrow` "Open file ...", then select the HDF5 plotfile of interest (e.g.,``plt00000.h5``), and select "Chombo" in the "Open file as type" dropdown menu. VisIt can also recognize the time steps automatically based on the numbers in the HDF5 plotfile names in a directory. .. _section-1: ParaView ======== The open source visualization package ParaView v5.7 and later can be used to view 2D and 3D plotfiles, as well as particles data. Download the package at https://www.paraview.org/. To open a plotfile (for example, you could run the ``HeatEquation_EX1_C`` in 3D): #. Run ParaView v5.7, then select "File" :math:`\rightarrow` "Open". #. Navigate to your run directory, and select the fluid or particle plotfile. Note that you can either open single/multiple plotfile(s) at once by selecting them one by one or select an ensemble of file, labelled as ``plt..`` and indicated as a Group in the "Type" column of the file explorer (see :numref:`fig:ParaView_filegroup`). In the later case, Paraview will load the plotfiles as a time series. ParaView will ask you about the file type -- choose "AMReX/BoxLib Grid Reader" or "AMReX/BoxLib Particles Reader". #. Under the "Cell Arrays" field, select a variable (e.g., "phi") and click "Apply". Note that the default number of refinement levels loaded and visualized is 1. Change to the required number of AMR level before clicking "Apply". #. Under "Representation" select "Surface". #. Under "Coloring" select the variable you chose above. #. To add planes, near the top left you will see a cube icon with a green plane slicing through it. If you hover your mouse over it, it will say "Slice". Click that button. #. You can play with the Plane Parameters to define a plane of data to view, as shown in :numref:`fig:ParaView`. .. raw:: latex \begin{center} .. _fig:ParaView: .. figure:: ./Visualization/ParaView.png :width: 3.1in : Plotfile image generated with ParaView .. raw:: latex \end{center} Building an Iso-surface ----------------------- Note that Paraview is not able to generate iso-surfaces from cell centered data. To build an iso-surface (or iso-line in 2D): #. Perform a cell to node interpolation: "Filters" :math:`\rightarrow` "Alphabetical" :math:`\rightarrow` "Cell Data to Point Data". #. Use the "Contour" icon (next to the calculator) to select the data from which to build the contour ("Contour by"), enters the iso-surfaces values and click "Apply". Visualizing Particle Data ------------------------- To visualize particle data within plofile directories (for example, you could run the `NeighborList`_ example in `Tutorials/Particles`_): .. _`NeighborList`: https://amrex-codes.github.io/amrex/tutorials_html/Particles_Tutorial.html#neighborlist .. _`Tutorials/Particles`: https://amrex-codes.github.io/amrex/tutorials_html/Particles_Tutorial.html .. raw:: latex \begin{center} .. _fig:ParaView_filegroup: .. figure:: ./Visualization/ParaView_filegroup.png :width: 3.1in : File dialog in ParaView showing a group of plotfile directories selected .. raw:: latex \end{center} #. Run ParaView v5.7, and select then "File" :math:`\rightarrow` "Open". You will see a combined "plt.." group. Click on "+" to expand the group, if you want inspect the files in the group. You can select an individual plotfile directory or select a group of directories to read them a time series, as shown in :numref:`fig:ParaView_filegroup`, and click OK. ParaView will ask you about the file type -- choose "AMReX/BoxLib Particles Reader". #. The "Properties" panel in ParaView allows you to specify the "Particle Type", which defaults to "particles". Using the "Properties" panel, you can also choose which point arrays to read. #. Click "Apply" and under "Representation" select "Point Gaussian". #. Change the Gaussian Radius if you like. You can scroll through the frames with the VCR-like controls at the top, as shown in :numref:`fig:ParaView_particles`. .. raw:: latex \begin{center} .. _fig:ParaView_particles: .. figure:: ./Visualization/ParaView_particles.png :width: 3.1in : Particle image generated with ParaView .. raw:: latex \end{center} Following these instructions, you can open fluid and/or particles plotfiles and visualize them together on the same Panel View. Once you have loaded an AMReX plotfile time series (fluid and/or particles), you can generate a movie following these instructions: #. "File" :math:`\rightarrow` "Save Animation...". #. Enter a file name, select ".avi" as the Type of File and click "OK". #. Adjust the resolution, compression and framerate, and click "OK" Plot a Vector Field ------------------- Paraview can be used to plot a vector field from AMR plotfile data. In this example we will assume a single vector has been stored as three separate variables, ``V_x``, ``V_y`` and ``V_z``. The steps below outline a basic construction: #. Open a plotfile or plotfile group, using ``File`` :math:`\rightarrow` ``Open``. A pop-up will appear, select "AMReX/Boxlib Grid Reader". #. Select the plotfile or group in the Pipeline Browser. The Cell Array Status window of the Properties should populate with the values ``V_x``, ``V_y`` and ``V_z``. Select these values and click apply. #. Select the Cell Centers filter from ``Filters`` :math:`\rightarrow` ``Alphabetical`` :math:`\rightarrow` ``Cell Centers`` and apply. #. Next we'll define a vector variable using the Calculator filter. Select ``Filters`` :math:`\rightarrow` ``Alphabetical`` :math:`\rightarrow` ``Calculator``. Under the Properties heading, set the Attribute Type to Point Data. The Result Array Name is the name of the vector value we will create. In the line below that we define a new vector value with the equation: ``V_x*iHat + V_y*jHat + V_z*kHat`` Note that, the values ``V_x``, ``V_y`` and ``V_z``, should be selectable from the dropdown Scalars menu. Apply the filter. #. To plot the arrows, select the Glyph filter, ``Filters`` :math:`\rightarrow` ``Alphabetical`` :math:`\rightarrow` ``Glyph``. Under the heading, Glyph Source, select ``Arrow``. Under Orientation, select the name of the vector value created in the last step. The default name is ``Result``. Apply the filter to display the vector field. One may want to adjust the appearance of the vector field by scaling each vector by its magnitude. To do this, look under the Scale heading, select the vector value as the Scale Array and select Scale by Magnitude. To adjust the number and location of vectors displayed, one may alter the settings under the Masking heading. .. figure:: ./Visualization/ParaView_vectorfield.png :width: 3.1in Vector Field generated with ParaView ParaView HDF5 Format -------------------- The plotfiles generated with the HDF5 format can be visualized by ParaView. To open a single plotfile, run VisIt, select "File" :math:`\rightarrow` "Open", then select the HDF5 plotfile (e.g.,``plt00000.h5``). You can select an individual plotfile or select a group of files to read as time series, then click OK. ParaView will ask you about the file type -- choose "VisItChomboReader". .. _section-2: yt == yt, an open source Python package available at http://yt-project.org/, can be used for analyzing and visualizing mesh and particle data generated by AMReX codes. Some of the AMReX developers are also yt project members. Below we describe how to use on both a local workstation, as well as at the NERSC HPC facility for high-throughput visualization of large data sets. Note - AMReX datasets require yt version 3.4 or greater. Using on a local workstation ----------------------------- Running yt on a local system generally provides good interactivity, but limited performance. Consequently, this configuration is best when doing exploratory visualization (e.g., experimenting with camera angles, lighting, and color schemes) of small data sets. To use yt on an AMReX plot file, first start a Jupyter notebook or an IPython kernel, and import the ``yt`` module: .. highlight:: python :: In [1]: import yt In [2]: print(yt.__version__) 3.4-dev Next, load a plot file; in this example we use a plot file from the Nyx cosmology application: .. highlight:: python :: In [3]: ds = yt.load("plt00401") yt : [INFO ] 2017-05-23 10:03:56,182 Parameters: current_time = 0.00605694344696544 yt : [INFO ] 2017-05-23 10:03:56,182 Parameters: domain_dimensions = [128 128 128] yt : [INFO ] 2017-05-23 10:03:56,182 Parameters: domain_left_edge = [ 0. 0. 0.] yt : [INFO ] 2017-05-23 10:03:56,183 Parameters: domain_right_edge = [ 14.24501 14.24501 14.24501] In [4]: ds.field_list Out[4]: [('DM', 'particle_mass'), ('DM', 'particle_position_x'), ('DM', 'particle_position_y'), ('DM', 'particle_position_z'), ('DM', 'particle_velocity_x'), ('DM', 'particle_velocity_y'), ('DM', 'particle_velocity_z'), ('all', 'particle_mass'), ('all', 'particle_position_x'), ('all', 'particle_position_y'), ('all', 'particle_position_z'), ('all', 'particle_velocity_x'), ('all', 'particle_velocity_y'), ('all', 'particle_velocity_z'), ('boxlib', 'density'), ('boxlib', 'particle_mass_density')] From here one can make slice plots, 3-D volume renderings, etc. An example of the slice plot feature is shown below: .. highlight:: python :: In [9]: slc = yt.SlicePlot(ds, "z", "density") yt : [INFO ] 2017-05-23 10:08:25,358 xlim = 0.000000 14.245010 yt : [INFO ] 2017-05-23 10:08:25,358 ylim = 0.000000 14.245010 yt : [INFO ] 2017-05-23 10:08:25,359 xlim = 0.000000 14.245010 yt : [INFO ] 2017-05-23 10:08:25,359 ylim = 0.000000 14.245010 In [10]: slc.show() In [11]: slc.save() yt : [INFO ] 2017-05-23 10:08:34,021 Saving plot plt00401_Slice_z_density.png Out[11]: ['plt00401_Slice_z_density.png'] The resulting image is :numref:`fig:yt_Nyx_slice_plot`. One can also make volume renderings with ; an example is show below: .. _fig:yt_Nyx_slice_plot: .. figure:: ./Visualization/yt_Nyx_density_slice.png : Slice plot of :math:`128^3` Nyx simulation using yt. .. highlight:: python :: In [12]: sc = yt.create_scene(ds, field="density", lens_type="perspective") In [13]: source = sc[0] In [14]: source.tfh.set_bounds((1e8, 1e15)) In [15]: source.tfh.set_log(True) In [16]: source.tfh.grey_opacity = True In [17]: sc.show() : Sources: source_00: :YTRegion (plt00401): , center=[ 1.09888770e+25 1.09888770e+25 1.09888770e+25] cm, left_edge=[ 0. 0. 0.] cm, right_edge=[ 2.19777540e+25 2.19777540e+25 2.19777540e+25] cm transfer_function:None Camera: : position:[ 14.24501 14.24501 14.24501] code_length focus:[ 7.122505 7.122505 7.122505] code_length north_vector:[ 0.81649658 -0.40824829 -0.40824829] width:[ 21.367515 21.367515 21.367515] code_length light:None resolution:(512, 512) Lens: : lens_type:perspective viewpoint:[ 0.95423473 0.95423473 0.95423473] code_length In [19]: sc.save() yt : [INFO ] 2017-05-23 10:15:07,825 Rendering scene (Can take a while). yt : [INFO ] 2017-05-23 10:15:07,825 Creating volume yt : [INFO ] 2017-05-23 10:15:07,996 Creating transfer function yt : [INFO ] 2017-05-23 10:15:07,997 Calculating data bounds. This may take a while. Set the TransferFunctionHelper.bounds to avoid this. yt : [INFO ] 2017-05-23 10:15:16,471 Saving render plt00401_Render_density.png The output of this is :numref:`fig:yt_Nyx_vol_rend`. .. _fig:yt_Nyx_vol_rend: .. figure:: ./Visualization/yt_Nyx_density_vol_rend.png Volume rendering of :math:`128^3` Nyx simulation using yt. This corresponds to the same plot file used to generate the slice plot in :numref:`fig:yt_Nyx_slice_plot`. Using yt at NERSC (*under development*) --------------------------------------- Because yt is Python-based, it is portable and can be used in many software environments. Here we focus on yt's capabilities at NERSC, which provides resources for performing both interactive and batch queue-based visualization and analysis of AMReX data. Coupled with yt's MPI and OpenMP parallelization capabilities, this can enable high-throughput visualization and analysis workflows. Interactive yt with Jupyter notebooks ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Unlike VisIt (see the section on :ref:`sec:visit`), yt has no client-server interface. Such an interface is often crucial when one has large data sets generated on a remote system, but wishes to visualize the data on a local workstation. Both copying the data between the two systems, as well as visualizing the data itself on a workstation, can be prohibitively slow. Fortunately, NERSC has implemented several resources which allow one to interact with yt remotely, emulating a client-server model. In particular, NERSC now hosts Jupyter notebooks which run IPython kernels on the Cori system; this provides users access to the ``$HOME``, ``/project``, and ``$SCRATCH`` file systems from a web browser-based Jupyter notebook. ***Please note that Jupyter hosting at NERSC is still under development, and the environment may change without notice.*** NERSC also provides Anaconda Python, which allows users to create their own customizable Python environments. It is recommended to install yt in such an environment. One can do so with the following example: .. highlight:: console :: user@cori10:~> module load python/3.5-anaconda user@cori10:~> conda create -p $HOME/yt-conda numpy user@cori10:~> source activate $HOME/yt-conda (/global/homes/u/user/yt-conda/) user@cori10:~> pip install yt More information about Anaconda Python at NERSC is here: http://www.nersc.gov/users/data-analytics/data-analytics/python/anaconda-python/. One can then configure this Anaconda environment to run in a Jupyter notebook hosted on the Cori system. Currently this is available in two places: on https://ipython.nersc.gov, and on https://jupyter-dev.nersc.gov. The latter likely reflects what the stable, production environment for Jupyter notebooks will look like at NERSC, but it is still under development and subject to change. To load this custom Python kernel in a Jupyter notebook, follow the instructions at this URL under the "Custom Kernels" heading: http://www.nersc.gov/users/data-analytics/data-analytics/web-applications-for-data-analytics. After writing the appropriate ``kernel.json`` file, the custom kernel will appear as an available Jupyter notebook. Then one can interactively visualize AMReX plot files in the web browser. [1]_ Parallel ~~~~~~~~ Besides the benefit of no longer needing to move data back and forth between NERSC and one's local workstation to do visualization and analysis, an additional feature of yt which takes advantage of the computational resources at NERSC is its parallelization capabilities. yt supports both MPI- and OpenMP-based parallelization of various tasks, which are discussed here: http://yt-project.org/doc/analyzing/parallel_computation.html. Configuring yt for MPI parallelization at NERSC is a more complex task than discussed in the official yt documentation; the command ``pip install mpi4py`` is not sufficient. Rather, one must compile ``mpi4py`` from source using the Cray compiler wrappers ``cc``, ``CC``, and ``ftn`` on Cori. Instructions for compiling ``mpi4py`` at NERSC are provided here: http://www.nersc.gov/users/data-analytics/data-analytics/python/anaconda-python/#toc-anchor-3. After ``mpi4py`` has been compiled, one can use the regular Python interpreter in the Anaconda environment as normal; when executing yt operations which support MPI parallelization, the multiple MPI processes will spawn automatically. Although several components of yt support MPI parallelization, a few are particularly useful: - **Time series analysis.** Often one runs a simulation for many time steps and periodically writes plot files to disk for visualization and post-processing. yt supports parallelization over time series data via the ``DatasetSeries`` object. yt can iterate over a ``DatasetSeries`` in parallel, with different MPI processes operating on different elements of the series. This page provides more documentation: http://yt-project.org/doc/analyzing/time_series_analysis.html#time-series-analysis. - **Volume rendering**. yt implements spatial decomposition among MPI processes for volume rendering procedures, which can be computationally expensive. Note that yt also implements OpenMP parallelization in volume rendering, and so one can execute volume rendering with a hybrid MPI+OpenMP approach. See this URL for more detail: http://yt-project.org/doc/visualizing/volume_rendering.html?highlight=openmp#openmp-parallelization. - **Generic parallelization over multiple objects.** Sometimes one wishes to loop over a series which is not a ``DatasetSeries``, e.g., performing translational or rotational operations on a camera to make a volume rendering in which the field of view moves through the simulation. In this case, one is applying a set of operations on a single object (a single plot file), rather than over a time series of data. For this workflow, yt provides the ``parallel_objects()`` function. See this URL for more details: http://yt-project.org/doc/analyzing/parallel_computation.html#parallelizing-over-multiple-objects. An example of MPI parallelization in yt is shown below, where one animates a time series of plot files from an IAMR simulation while revolving the camera such that it completes two full revolutions over the span of the animation: .. highlight:: python :: import yt import glob import numpy as np yt.enable_parallelism() base_dir1 = '/global/cscratch1/sd/user/Nyx_run_p1' base_dir2 = '/global/cscratch1/sd/user/Nyx_run_p2' base_dir3 = '/global/cscratch1/sd/user/Nyx_run_p3' glob1 = glob.glob(base_dir1 + '/plt*') glob2 = glob.glob(base_dir2 + '/plt*') glob3 = glob.glob(base_dir3 + '/plt*') files = sorted(glob1 + glob2 + glob3) ts = yt.DatasetSeries(files, parallel=True) frame = 0 num_frames = len(ts) num_revol = 2 slices = np.arange(len(ts)) for i in yt.parallel_objects(slices): sc = yt.create_scene(ts[i], lens_type='perspective', field='z_velocity') source = sc[0] source.tfh.set_bounds((1e-2, 9e+0)) source.tfh.set_log(False) source.tfh.grey_opacity = False cam = sc.camera cam.rotate(num_revol*(2.0*np.pi)*(i/num_frames), rot_center=np.array([0.0, 0.0, 0.0])) sc.save(sigma_clip=5.0) When executed on 4 CPUs on a Haswell node of Cori, the output looks like the following: :: user@nid00009:~/yt_vis/> srun -n 4 -c 2 --cpu_bind=cores python make_yt_movie.py yt : [INFO ] 2017-05-23 16:51:33,565 Global parallel computation enabled: 0 / 4 yt : [INFO ] 2017-05-23 16:51:33,565 Global parallel computation enabled: 2 / 4 yt : [INFO ] 2017-05-23 16:51:33,566 Global parallel computation enabled: 1 / 4 yt : [INFO ] 2017-05-23 16:51:33,566 Global parallel computation enabled: 3 / 4 P003 yt : [INFO ] 2017-05-23 16:51:33,957 Parameters: current_time = 0.103169376949795 P003 yt : [INFO ] 2017-05-23 16:51:33,957 Parameters: domain_dimensions = [128 128 128] P003 yt : [INFO ] 2017-05-23 16:51:33,957 Parameters: domain_left_edge = [ 0. 0. 0.] P003 yt : [INFO ] 2017-05-23 16:51:33,958 Parameters: domain_right_edge = [ 6.28318531 6.28318531 6.28318531] P000 yt : [INFO ] 2017-05-23 16:51:33,969 Parameters: current_time = 0.0 P000 yt : [INFO ] 2017-05-23 16:51:33,969 Parameters: domain_dimensions = [128 128 128] P002 yt : [INFO ] 2017-05-23 16:51:33,969 Parameters: current_time = 0.0687808060674485 P000 yt : [INFO ] 2017-05-23 16:51:33,969 Parameters: domain_left_edge = [ 0. 0. 0.] P002 yt : [INFO ] 2017-05-23 16:51:33,969 Parameters: domain_dimensions = [128 128 128] P000 yt : [INFO ] 2017-05-23 16:51:33,970 Parameters: domain_right_edge = [ 6.28318531 6.28318531 6.28318531] P002 yt : [INFO ] 2017-05-23 16:51:33,970 Parameters: domain_left_edge = [ 0. 0. 0.] P002 yt : [INFO ] 2017-05-23 16:51:33,970 Parameters: domain_right_edge = [ 6.28318531 6.28318531 6.28318531] P001 yt : [INFO ] 2017-05-23 16:51:33,973 Parameters: current_time = 0.0343922351851018 P001 yt : [INFO ] 2017-05-23 16:51:33,973 Parameters: domain_dimensions = [128 128 128] P001 yt : [INFO ] 2017-05-23 16:51:33,974 Parameters: domain_left_edge = [ 0. 0. 0.] P001 yt : [INFO ] 2017-05-23 16:51:33,974 Parameters: domain_right_edge = [ 6.28318531 6.28318531 6.28318531] P000 yt : [INFO ] 2017-05-23 16:51:34,589 Rendering scene (Can take a while). P000 yt : [INFO ] 2017-05-23 16:51:34,590 Creating volume P003 yt : [INFO ] 2017-05-23 16:51:34,592 Rendering scene (Can take a while). P002 yt : [INFO ] 2017-05-23 16:51:34,592 Rendering scene (Can take a while). P003 yt : [INFO ] 2017-05-23 16:51:34,593 Creating volume P002 yt : [INFO ] 2017-05-23 16:51:34,593 Creating volume P001 yt : [INFO ] 2017-05-23 16:51:34,606 Rendering scene (Can take a while). P001 yt : [INFO ] 2017-05-23 16:51:34,607 Creating volume Because the ``parallel_objects()`` function transforms the loop into a data-parallel problem, this procedure strong scales nearly perfectly to an arbitrarily large number of MPI processes, allowing for rapid rendering of large time series of data. .. [1] It is convenient to use the magic command ``%matplotlib inline`` in order to render matplotlib figures in the same browser window as the notebook, as opposed to displaying it as a new window. SENSEI ====== SENSEI is a light weight framework for in situ data analysis. SENSEI's data model and API provide uniform access to and run time selection of a diverse set of visualization and analysis back ends including VisIt Libsim, ParaView Catalyst, VTK-m, Ascent, ADIOS, Yt, and Python. System Architecture ------------------- .. _sensei_arch: .. figure:: ./Visualization/sensei_amrex_arch_sm_824.png SENSEI's in situ architecture enables use of a diverse of back ends which can be selected at run time via an XML configuration file The three major architectural components in SENSEI are *data adaptors* which present simulation data in SENSEI's data model, *analysis adaptors* which present the back end data consumers to the simulation, and *bridge code* from which the simulation manages adaptors and periodically pushes data through the system. SENSEI comes equipped with a number of analysis adaptors enabling use of popular analysis and visualization libraries such as VisIt Libsim, ParaView Catalyst, Python, and ADIOS to name a few. AMReX contains SENSEI data adaptors and bridge code making it easy to use in AMReX based simulation codes. SENSEI provides a *configurable analysis adaptor* which uses an XML file to select and configure one or more back ends at run time. Run time selection of the back end via XML means one user can access Catalyst, another Libsim, yet another Python with no changes to the code. This is depicted in figure :numref:`sensei_arch`. On the left side of the figure AMReX produces data, the bridge code pushes the data through the configurable analysis adaptor to the back end that was selected at run time. AMReX Integration ------------------ AMReX codes based on :cpp:`amrex::Amr` can use SENSEI simply by enabling it in the build and run via ParmParse parameters. AMReX codes based on :cpp:`amrex::AmrMesh` need to additionally invoke the bridge code in :cpp:`amrex::AmrMeshInSituBridge`. Compiling with GNU Make ----------------------- For codes making use of AMReX's build system add the following variable to the code's main :code:`GNUmakefile`. .. code-block:: bash USE_SENSEI_INSITU = TRUE When set, AMReX's make files will query environment variables for the lists of compiler and linker flags, include directories, and link libraries. These lists can be quite elaborate when using more sophisticated back ends, and are best set automatically using the :code:`sensei_config` command line tool that should be installed with SENSEI. Prior to invoking make use the following command to set these variables: .. code-block:: bash source sensei_config Typically, the :code:`sensei_config` tool is in the users PATH after loading the desired SENSEI module. After configuring the build environment with :code:`sensei_config`, proceed as usual. .. code-block:: bash make -j4 -f GNUmakefile Compiling with CMake -------------------- For codes making use of AMReX's CMake based build, one needs to enable SENSEI and point to the CMake configuration installed with SENSEI. .. code-block:: bash cmake -DAMReX_SENSEI=ON -DSENSEI_DIR=//cmake .. When CMake generates the make files proceed as usual. Note: may be `lib` or `lib64` or something else depending on what CMake decided to use for your particular OS. See the CMake GNUInstallDirs documentation for more information. .. code-block:: bash make -j4 -f GNUmakefile ParmParse Configuration ----------------------- Once an AMReX code has been compiled with SENSEI features enabled, it will need to be enabled and configured at runtime. This is done using ParmParse input file. The following 3 ParmParse parameters are used: .. code-block:: python sensei.enabled = 1 sensei.config = render_iso_catalyst_2d.xml sensei.frequency = 2 :code:`sensei.enabled` turns SENSEI on or off. :code:`sensei.config` points to the SENSEI XML file which selects and configures the desired back end. :code:`sensei.frequency` controls the number of level 0 time steps in between SENSEI processing. Back-end Selection and Configuration ------------------------------------ The back end is selected and configured at run time using the SENSEI XML file. The XML sets parameters specific to SENSEI and to the chosen back end. Many of the back ends have sophisticated configuration mechanisms which SENSEI makes use of. For example the following XML configuration was used on NERSC's Cori with IAMR to render 10 iso surfaces, shown in figure :numref:`rt_visit`, using VisIt Libsim. .. code-block:: xml The *session* attribute names a session file that contains VisIt specific runtime configuration. The session file is generated using VisIt GUI on a representative dataset. Usually this data set is generated in a low resolution run of the desired simulation. .. _rt_visit: .. figure:: ./Visualization/rt_2048_visit_000500.png SENSEI-Libsim in situ visualization of a Raleigh-Taylor instability computed by IAMR on NERSC Cori using 2048 cores. The same run and visualization was repeated using ParaView Catalyst, shown in figure :numref:`rt_pv`, by providing the following XML configuration. .. code-block:: xml Here the *filename* attribute is used to pass Catalyst a Catalyst specific configuration that was generated using the ParaView GUI on a representative dataset. .. _rt_pv: .. figure:: ./Visualization/rt_2048_paraview_000500.png SENSEI-Catalyst in situ visualization of a Raleigh-Taylor instability computed by IAMR on NERSC Cori using 2048 cores. Obtaining SENSEI ----------------- SENSEI is hosted on github at https://github.com/SENSEI-insitu/SENSEI.git To ease the burden of wrangling back end installs SENSEI provides two platforms with all dependencies pre-installed, a VirtualBox VM, and a NERSC Cori deployment. New users are encouraged to experiment with one of these. SENSEI VM ~~~~~~~~~ The SENSEI VM comes with all of SENSEI's dependencies and the major back ends such as VisIt and ParaView installed. The VM is the easiest way to test things out. It also can be used to see how installs were done and the environment configured. NERSC Cori ~~~~~~~~~~ SENSEI is deployed at NERSC on Cori. The NERSC deployment includes the major back ends such as ParaView Catalyst, VisIt Libsim, and Python. AmrLevel Tutorial with Catalyst +++++++++++++++++++++++++++++++ The following steps show how to run the tutorial with ParaView Catalyst. The simulation will periodically write images during the run. .. code-block:: bash ssh cori.nersc.gov cd $SCRATCH git clone https://github.com/AMReX-Codes/amrex.git git clone https://github.com/AMReX-Codes/amrex-tutorials.git cd amrex-tutorials/ExampleCodes/Amr/Advection_AmrLevel/Exec/SingleVortex module use /usr/common/software/sensei/modulefiles module load sensei/2.1.0-catalyst-shared source sensei_config vim GNUmakefile # USE_SENSEI_INSITU=TRUE make -j4 -f GNUmakefile vim inputs # sensei.enabled=1 # sensei.config=sensei/render_iso_catalyst_2d.xml salloc -C haswell -N 1 -t 00:30:00 -q debug cd $SCRATCH/amrex-tutorials/ExampleCodes/Amr/Advection_AmrLevel/Exec/SingleVortex ./main2d.gnu.haswell.MPI.ex inputs AmrLevel Tutorial with Libsim +++++++++++++++++++++++++++++ The following steps show how to run the tutorial with VisIt Libsim. The simulation will periodically write images during the run. .. code-block:: bash ssh cori.nersc.gov cd $SCRATCH git clone https://github.com/AMReX-Codes/amrex.git git clone https://github.com/AMReX-Codes/amrex-tutorials.git cd amrex-tutorials/ExampleCodes/Amr/Advection_AmrLevel/Exec/SingleVortex module use /usr/common/software/sensei/modulefiles module load sensei/2.1.0-libsim-shared source sensei_config vim GNUmakefile # USE_SENSEI_INSITU=TRUE make -j4 -f GNUmakefile vim inputs # sensei.enabled=1 # sensei.config=sensei/render_iso_libsim_2d.xml salloc -C haswell -N 1 -t 00:30:00 -q debug cd $SCRATCH/amrex-tutorials/ExampleCodes/Amr/Advection_AmrLevel/Exec/SingleVortex ./main2d.gnu.haswell.MPI.ex inputs